How to Download Windows 8 Iso on Mac

Skip to:

• content
• search
• login

Install 64-bit Windows on your macOS computer using Boot Camp Assistant

On this page:

• Overview
• Pre-installation notes
• Installation guide
  • Step 1: Check for macOS updates
  • Step 2: Confirm your macOS version
  • Step 3: Turn off FileVault
  • Step 4: Download Windows 10
  • Step 5: Use Boot Camp Assistant
  • Step 6: Install Windows 10
  • Step 7: Configure Windows 10
  • Step 8: Create your Windows administrator account
  • Step 9: Install support software
  • Step 10: Configure Windows Wi-Fi settings
  • Step 11: Configure the default boot operating system
• Switch operating systems
• Get help

---

Overview

If you wish to run both macOS and Windows on a single Mac computer, UITS recommends using Apple's Boot Camp utility to install a 64-bit version of Windows on your Mac. In macOS, the Boot Camp Assistant app will help you partition your Mac hard drive to accommodate both operating systems, so you can install Windows from an installation disk or an ISO image stored on a USB flash drive.

Important:

Partitioning your system's hard drive with Boot Camp Assistant may erase all your data. Before proceeding, back up/copy all personal files (documents, pictures, music, videos) to a flash drive, external hard drive, or cloud storage. Alternatively, you can use Time Machine with an external hard drive to back up your entire Mac computer; for instructions, see Mac Basics: Time Machine backs up your Mac. If you need assistance setting up Time Machine, contact your campus Support Center.

Pre-installation notes

• Make sure your computer meets these requirements:
  • At least 80 GB of free hard drive space
  • You have either the keyboard and mouse (or trackpad) that came with your Mac, or a USB keyboard and mouse
• Obtain a USB flash drive (at least 16 GB).
• During installation, you will be prompted to enter an account name and password; this is for the administrator account, and should not be the one you generally use. You also will be prompted to enter your time zone.
• Ensure that the computer is plugged into a power source, as the entire process may take several hours.

Installation guide

Note:

• These instructions are intended strictly as a guide for installing a fully updated 64-bit version of Windows on a macOS High Sierra 10.13.x or newer computer at IU; if your computer cannot run that version of macOS, you'll need to follow Apple's Boot Camp Help: Install Windows on your Mac.
• Perform these steps in order.

Step 1: Check for macOS updates

Before configuring Boot Camp, it is critical to make sure that your Mac's software is up-to-date, which lessens the risk of encountering problems during installation:

1. In the menu bar, from the menu, click .
2. At the top of the window, click .
3. If there are updates for your computer, in the upper right corner of the window, click .

   If you're prompted, enter an administrator's username and password, and if prompted, allow your computer to restart.

When your computer restarts, check for additional updates by repeating the steps above. Repeat the process until there are no new updates in the App Store.

Step 2: Confirm your macOS version

In the menu bar, from the menu, click . The window will display the version of macOS on your computer. If you aren't running macOS High Sierra (10.13.x), you need to follow Apple's Boot Camp Help: Install Windows on your Mac.

Step 3: Turn off FileVault

To proceed, you need to divide your Mac's hard drive into a section for macOS and a section for Windows. This process is called partitioning a disk, and requires that you disable FileVault (whole-disk encryption provided by Apple):

1. In the menu bar, from the menu, click .
2. Click .

   

3. Click . The FileVault control panel will open, locked by default.

   

4. Before you can disable FileVault, it requires you to unlock the control panel to show that you're an administrator on your computer. To do so, click the lock icon. Enter your administrator username (if required) and your password.
5. You'll then be able to click . To confirm, click .

   Decrypting an encrypted drive can take some time, the exact time being determined by how much data is on your disk, the disk size, and your computer's hardware capabilities.

Step 4: Download Windows 10

Note:

The version of Windows 10 on IUware will not work with Boot Camp; you'll need to download Windows directly from Microsoft, and use a product key you get from IUware.

Downloading Windows 10 Education takes some time, depending on the speed of your internet connection. Do not attempt the download on a metered connection, such as a tethered cell phone.

1. Get a product key:
   1. Go to IUware.
   2. On the left, click .
   3. Click Windows 10 Education, and choose the 64-bit version.
   4. Click . If prompted, log in with your IU username and passphrase.
   5. Write the product key (a series of letters and numbers that resembles "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX") on paper, since you won't be able to open anything on your Mac while Windows is being installed.
2. Download Windows 10:
   1. Navigate to Microsoft's Software Download page, and click .
   2. In the drop-down list, choose , and click .
   3. Select the appropriate language, and click .

Step 5: Use Boot Camp Assistant

Important:

Back up your files if you haven't yet done so. Partitioning your system's hard drive with Boot Camp Assistant may erase all files. To learn more, see Back up your Mac. For details about backing up your documents and content using cloud services at IU, see Store and share your individual files at IU.

The Boot Camp Assistant will help guide you through the process of adding Windows to your Mac.

1. For an easy way to begin, click , the Spotlight icon. In the search bar, type boot camp assistant, and press .
2. The next screen describes what Boot Camp assistant does, and warns you to back up your disk if you haven't already done so. Click .
3. To select the installation tasks to complete, make sure and are both selected.

   Before continuing, make sure a USB drive (at least 16 GB) is connected to the system, and be aware that the entire contents of that flash drive will be erased.

4. On the next screen, make sure the ISO file you just downloaded from Microsoft and the appropriate flash drive are both selected. Click .
5. To confirm that the drive will be overwritten, click .

   This step will take some time, depending on your computer's hardware capabilities and your internet connection speed. Make sure your computer remains plugged into an AC outlet during this process.

6. To begin creating a partition on your Mac's hard disk to hold Windows, authenticate with your administrator password.
7. Use the slider between the Mac and Windows icons to select a size for the Windows partition.

   UITS recommends that you use 80 GB for just Windows, and 90 GB for Windows plus Microsoft Office.

8. Click .

   This process will take several minutes to complete. Once the partition is created, your Mac will restart and begin installing Windows 10. You may be prompted several times for your administrator password.

Step 6: Install Windows 10

Follow the Windows installation wizard to begin installing Windows. You'll be prompted with several questions about how to configure Windows for your needs.

These steps will take some time, depending on your computer's hardware capabilities. Make sure your computer remains plugged into an AC outlet during this process.

1. Select the language, time and currency format, and keyboard or input method for Windows. Click .
2. On the next screen, enter the product key you got from IUWare.
3. Choose the version of Windows that the product key unlocks (Windows 10 Education) and click .
4. Read and accept the license terms, and click .
5. Choose the partition on which Windows will be installed, called "BOOTCAMP". Click .
6. To confirm that you wish to format the partition, click . To continue, click .
7. The installer will copy Windows files and install any features and updates required. When prompted, click to restart your Mac and continue the Windows Installation process.

Step 7: Configure Windows 10

After Windows restarts, you'll need to do some configuration.

Note:

Microsoft's digital assistant, Cortana, will help guide you through this process. If you are wearing headphones, remove them while your computer is restarting. Until you can install the Boot Camp support software, you may not be able to control the volume of Cortana with the volume keys on your computer.

1. To select the appropriate region, choose , and click .
2. To select the keyboard layout, make sure is selected, and click .
3. If you would like to add a secondary keyboard layout, use the next screen to do so; otherwise, click .
4. On the "Let's connect you to a network "screen, click .

Step 8: Create your Windows administrator account

Note:

The Windows administrator account you create should not be an account you use for general use of this computer.

1. To create your account, type your name and click .
2. Type a password and click . Do not use your IU network passphrase.
3. Confirm your password by typing it again, and click .
4. Select a series of three security questions, clicking after each one.
5. Decide whether or not you want to use Cortana in Windows. Decide what privacy settings you would like to enable or disable, and click .

Windows will do its final configurations. This step will take some time, depending on your computer's hardware capabilities. Make sure your computer remains plugged in to an AC outlet during this process.

Step 9: Install support software

Once Windows has started (may take some time), the Boot Camp installer will walk you through installing Apple's support software.

1. To begin the process, click .
2. Read and accept the license agreement, and click . All the Apple-specific software you need to run Windows efficiently on your computer will be installed.
3. When the installer finishes, click .
4. To restart the computer, click .
5. When the computer restarts, click the trackpad or press any key to display the login field. Log in with the password you created earlier in the configuration process.

Step 10: Configure Windows Wi-Fi settings

Note:

eduroam is replacing IU Secure as the default wireless network for students, faculty, staff, and affiliates on all IU campuses. As of May 26, 2021, IU Secure is no longer available in the residence halls, and will fully retire in the near future. All new wireless connections should use eduroam; see Connect to eduroam.

To connect to a wireless network, in the system tray at the bottom right of the screen, click the Wi-Fi icon.

If you are off campus, connect to the wireless network you expect to use in your location. If you are on campus:

• eduroam:

  The simplest and most secure way to connect to eduroam is to use the Eduroam Network Setup Tool. Alternatively, you can use the instructions below to connect manually.

  To connect manually, select from the list of available wireless networks, and enter your full IU email address (for example, johndoe@iu.edu) and passphrase.

  Notes:

  • If you connect to eduroam at an institution other than an IU campus, you'll need to use the IU VPN to access some resources (such as remote desktop, library resources, and department drives).
  • For troubleshooting tips, see Troubleshoot your eduroam connection.
• IU Secure: To connect, select from the list of available wireless networks, and enter your IU username and passphrase.

You have finished installing Windows on your Mac. If you need to install Microsoft Office, see About Microsoft 365 at IU.

Step 11: Configure the default boot operating system

You have the option to boot to either Windows or macOS when starting your Mac. You can also select one operating system for the computer to start by default.

1. To shut down your Mac while you're in Windows, from the menu, click the button, and then click .
2. To boot into macOS, with the power off, press and hold the Option key and power on your Mac.
3. Hold the Option key until you see two hard disk icons and a Wi-Fi network selector. Boot into macOS by clicking (you'll select the default boot operating system momentarily).
4. From the Startup Disk control panel, click the menu. Click , and then .
5. To unlock the settings, click the Lock icon, and then type your administrator passphrase.
6. To select the default boot operating system, click the disk that correlates to the operating system you would like to select. For macOS, choose ; for Windows, choose . If you would like to boot into the selected operating system now, click .

Switch operating systems

Whenever you would like to switch operating systems:

1. Shut down the computer.
2. Press and hold the option key and power on your computer by pressing and releasing the power button.
3. When you see two hard disk icons, release the option key.
4. Click the hard disk icon that corresponds with the operating system you would like to boot. For macOS, choose ; for Windows, choose .

This is document bewm in the Knowledge Base.
Last modified on 2021-09-22 13:07:51 .

How to Download Windows 8 Iso on Mac

Source: https://kb.iu.edu/d/bewm

Share this post